Sim-Ex™ Lab Simulator for Network+ : Lab Exercises

Switch 2950 Console Password Assignment

Previous   |   Next

Description: Select 2950 switch using the N/W Diagram button in the router simulator. Assign password "consolepass" to line console 0. Use the line console 0 command, followed by the password and login subcommands, to require login and establish a login password on the console terminal or on a VTY port. By default, login is not enabled on the console or on VTY ports.


1. Enter global configuration mode

2. Enter line sub-configuration mode

3. Set the console password to "consolepass"

4. Exit line configuration mode

2950#configure terminal
2950(config)#line console 0
2950(config-line)#password consolepass

Note: Please refer to the Sim-Ex™ Lab Simulator for Network+ software to try complete lab with instructions.

Previous   |   Next

Disclaimer: is not affiliated with any certification vendor, and Sim-Ex™ Practice Exams are written independently by and not affiliated or authorized by respective certification providers. Sim-Ex™ is a trade mark of or entity representing™ is a trademark of CompTIA® organization.