Description: Configure WEP on a Wireless Access Point
Continuing from the previous lab, your task is to configure WEP on AP1 with a password Cert1 . Also verify that the SSID is set to CertExams.
| IP Address | 192.168.1.3 |
| Subnet mask | 255.255.255.0 |
| SSID | CertExams |
| Channel | 11 |
Network Diagram:
Instructions:
1. Open AP1 properties by clicking on the icon. Open Wireless Properties tag, and set the WEP value to Cert1.
2. Verify that the SSID is same as CertExams. If not, set it to CertExams
3. Save and exit configuration.
Notes: WEP stands for Wireless Equivalent Privacy. There are several other security mechanisms available for securing wireless networks. These include WPA, MAC filtering, Authentication.
Note: Please refer to the SimulationExams.com Network+ Lab Simulator software to try complete lab with instructions.
Disclaimer: Simulationexams.com is not affiliated with any certification vendor, and Sim-Ex™ Practice Exams are written independently by SimulationExams.com and not affiliated or authorized by respective certification providers. Sim-Ex™ is a trade mark of SimulationExams.com or entity representing Simulationexams.com.Network+™ is a trademark of CompTIA® organization.
