CCNP Support ( CIT 642-831) practice questions

CDP commands

Home     Previous     Up     Next

Q7. Which command can be used to view CDP information about a specific neighbor The output should include device ID, address, protocol, interface, hold time and version?

A. show cdp

B. show cdp neighbor

C. show cdp traffic

D. show cdp entry

Correct Answer: D


show cdp: This command shows global CDP information including timer and hold-time information.
Show cdp neighbor: This command displays neighboring device information such as device Ids, device capability, hardware platforms, and port type. 
Show cdp neighbor detail: This command displays additional information about the neighboring devices that include network-layer protocol information and version.
Show cdp entry: This command is useful for further troubleshooting. It displays information about intended Cisco device. The information include device ID, address and protocol, interface, platform, hold time and version.

Home     Previous     Up     Next

Disclaimer: All Simulation Exams practice tests, study guides and/or material are neither sponsored by, nor endorsed by, nor affiliated with Cisco® Systems or any other company. All trademarks are trademarks of their respective owners and duly acknowledged. CCNA, CCENT, ICND2, CCNP, CCIE are registered trade marks of Cisco®Systems. The practice tests material is a copyright of and the same is not approved or endorsed by respective certifying bodies. Thank-you for your interest in Simulation Exams. Please see read me file before you download, install, and/or use any software from For any information or questions regarding this Website, please e-mail webmaster at