Design a Home Network with a Router, Access Point, and Wireless Work Stations III

Previous   |   Next

Description: DHCP Server not configured with a static IP address. A network administration has configured various components of the small office network. However, none of the workstations are able to obtain the IP settings from the DHCP server. What is the likely problem?

The network is configured as below:

Server Configuration:

 IP address
 Subnet mask

DHCP Range on Server:

 Start IP
 Stop IP
 Subnet mask
 Default Gateway

Access Point (AP1): 

 SSID  CertExams
 WEP  Cert1

Router R1 configuration:

Subnet mask:

Client Configurations: All workstations have been configured to obtain the IP settings from DHCP server.

Network Diagram:

Network+ Lab Sim image

Note: Please refer to the Network+ Lab Simulator software to try complete lab with instructions.

Previous   |   Next

Disclaimer: All Simulation Exams practice tests, study guides and/or material are neither sponsored by, nor endorsed by, nor affiliated with CompTIA® or any other company. All trademarks are trademarks of their respective owners and duly  acknowledged. A+™, Network+™, i-Net+™, Server+™,Security+™ are registered trade marks of CompTIA®. The practice tests material is a copyright of and the same is not approved or endorsed by respective certifying bodies. Thank-you for your interest in Simulation Exams. Please see read me file before you download, install, and/or use any software from For any information or questions regarding this Website, please e-mail webmaster at