Blog         FAQ      

 Home > Network+ Lab Simulator > Available labs > Switch 2950

Download Network+ Lab Simulator   |    Available Labs

Switch 2950: Setting Privileged Password

Previous   |   Next

  Description: In this exercise, you assign enable password, and secret password on a 2950 switch. Select the switch by going to the network diagram, and selecting appropriate device from the drop down box. 


1. Enter global configuration mode

2. Set password for enable password and enable secret

3. Exit from the global configuration mode

2950#configure terminal
2950(config)#enable password epass
2950(config)#enable secret spass


Note: Please refer to the Network+ Lab Simulator software to try complete lab with instructions.

Previous   |   Next


Privacy Policy

Copyright © 2000-2019 All rights reserved

Website design by

Disclaimer: All Simulation Exams practice tests, study guides and/or material are neither sponsored by, nor endorsed by, nor affiliated with CompTIA® or any other company. All trademarks are trademarks of their respective owners and duly  acknowledged. A+™, Network+™, i-Net+™, Server+™,Security+™ are registered trade marks of CompTIA®. The practice tests material is a copyright of and the same is not approved or endorsed by respective certifying bodies. Thank-you for your interest in Simulation Exams. Please see read me file before you download, install, and/or use any software from  For any information or questions regarding this Website, please e-mail webmaster at