Frequent Questions      

 Home > Network+ Lab Simulator > Available labs > Setting Telnet Password

Download Network+ Lab Simulator   |    Available Labs

Setting Telnet Password

Previous   |   Next

  Description: Set the vty password for lines 0 to 4.


1. Enter into global configuration mode

2. Configure a password 'cisco' that will enable remote users to telnet into vty ports 0-4

R1#configure terminal
R1(config)#line vty 0 4
R1(config-line)#password cisco

Note: Please refer to the Network+ Lab Simulator software to try complete lab with instructions.

Previous   |   Next


Copyright 2000-2018 All rights reserved

Website design by

Disclaimer: All Simulation Exams practice tests, study guides and/or material are neither sponsored by, nor endorsed by, nor affiliated with CompTIA or any other company. All trademarks are trademarks of their respective owners and duly  acknowledged. A+, Network+, i-Net+, Server+,Security+ are registered trade marks of CompTIA. The practice tests material is a copyright of and the same is not approved or endorsed by respective certifying bodies. Thank-you for your interest in Simulation Exams. Please see read me file before you download, install, and/or use any software from  For any information or questions regarding this Website, please e-mail webmaster at