Description: In this exercise, setting Auxiliary password to a router is being showcased. Like the console, Auxiliary Port is a physical port on every router and it is used for administrative console dial up access to the router.
Instructions:
1. Enter into global configuration mode
2. Type line aux ? to configure the auxiliary password
3. Enter login command and set auxiliary password as admin
R1>enable
R1#config t
R1(config)#line aux ?
R1(config)#line aux 0
R1(config-line)#login
R1(config-line)#password admin
Note: Please refer to the SimulationExams.com Network+ Lab Simulator software to try complete lab with instructions.
Disclaimer: All Simulation Exams practice tests, study guides and/or material are neither sponsored by, nor endorsed by, nor affiliated with CompTIA® or any other company. All trademarks are trademarks of their respective owners and duly acknowledged. A+™, Network+™, i-Net+™, Server+™,Security+™ are registered trade marks of CompTIA®. The practice tests material is a copyright of SimulationExams.com and the same is not approved or endorsed by respective certifying bodies. Thank-you for your interest in Simulation Exams. Please see read me file before you download, install, and/or use any software from SimulationExams.com For any information or questions regarding this Website, please e-mail webmaster at simulationexams.com