Frequent Questions      

   CCNA™ (200-125) VLAN/VTP Practice Questions

 

Home
         Previous           Next     

Q9: You have configured VLANs in your switched network and now want to check whether you have configured properly. Which command do you use? Assume that you are in privileged EXEC mode. Select one.

A. sh v-lan 

B. sh vlan vlan# 

C. sh vlan#

D. sh v-lans v-lan#

  Correct Answer: B

 

Explanation:

You use show vlan or shor vlan vlan# command to see the configuration details of VLANs. The command "sh vlan" will display the configuration information for all VLANs, where as the command "sh vlan vlan#" shows only the configuration information pertaining to that vlan. For example, if you want to see the configuration information for vlan2, you give the command "sh vlan 2".

Home
     Previous           Next     

Copyright © 2000-2017 SimulationExams.com All rights reserved

Website design by Anandsoft.com

Disclaimer: All Simulation Exams practice tests, study guides and/or material are neither sponsored by, nor endorsed by, nor affiliated with Cisco® Systems or any other company. All trademarks are trademarks of their respective owners and duly  acknowledged. CCNA™, CCENT™, ICND2™, CCNP™, CCIE™ are registered trade marks of Cisco® Systems. The practice tests material is a copyright of SimulationExams.com and the same is not approved or endorsed by respective certifying bodies. Thank-you for your interest in Simulation Exams. Please see read me file before you download, install, and/or use any software from SimulationExams.com  For any information or questions regarding this Website, please e-mail webmaster at simulationexams.com