Frequent Questions      

 Home > Cisco > CCNA > VLAN/VTP Practice Question 10

   CCNA™ (200-12) VLAN/VTP Practice Questions



Q10: You want to see whether the pruning is enabled in you network or not. Which command can you use to check this?

A. sh version

B. sh spantree

C. sh vtp

D. sh vlan

  Correct Answer: C



To verify any configuration change, "show vtp" privileged executive command can be used. This command displays, among other things, VTP domain name, VTP password if any, VTP pruning mode (enabled or disabled) and the IP address of the device that last modified the configuration.


Copyright © 2000-2018 All rights reserved

Website design by

Disclaimer: All Simulation Exams practice tests, study guides and/or material are neither sponsored by, nor endorsed by, nor affiliated with Cisco® Systems or any other company. All trademarks are trademarks of their respective owners and duly  acknowledged. CCNA™, CCENT™, ICND2™, CCNP™, CCIE™ are registered trade marks of Cisco® Systems. The practice tests material is a copyright of and the same is not approved or endorsed by respective certifying bodies. Thank-you for your interest in Simulation Exams. Please see read me file before you download, install, and/or use any software from  For any information or questions regarding this Website, please e-mail webmaster at