Frequent Questions      

     
 Home > Network+ Lab Simulator > Available labs > ipconfig /all command
     
 

Download Network+ Lab Simulator   |    Available Labs

Troubleshooting subnet mask on a Windows client computer using ipconfig /all command


Previous    |   Next

 
  Description: Troubleshooting subnet mask on a Windows client computer using ipconfig /all command.

Scenario: The manually configured client WS1 is unable to communicate to any other clients or gateway on the network. Check whether the same are properly configured on WS1.

WS1 Configuration:

 IP address  192.168.1.130
 subnet mask  255.255.255.128
 Default gateway  192.168.1.1

Network Diagram:

Note: Please refer to the SimulationExams.com Network+ Lab Simulator software to try complete lab with Instructions.

Previous    |   Next

 

Copyright 2000-2017 SimulationExams.com All rights reserved

Website design by Anandsoft.com

Disclaimer: All Simulation Exams practice tests, study guides and/or material are neither sponsored by, nor endorsed by, nor affiliated with CompTIA or any other company. All trademarks are trademarks of their respective owners and duly  acknowledged. A+, Network+, i-Net+, Server+,Security+ are registered trade marks of CompTIA. The practice tests material is a copyright of SimulationExams.com and the same is not approved or endorsed by respective certifying bodies. Thank-you for your interest in Simulation Exams. Please see read me file before you download, install, and/or use any software from SimulationExams.com  For any information or questions regarding this Website, please e-mail webmaster at simulationexams.com