Troubleshooting DHCP server and a client computer connected through a Switch. Verify DHCP configuration parameters.

Previous   |   Next

Description: Design a network with DHCP server and a client computer using a Switch. Verify DHCP configuration parameters.

Verify DHCP configuration parameters using appropriate command on the client computer. For this purpose, ping DHCP server by IP address or host name (Server) from the remote work station.

Configuration parameters:

DHCP Server IP address 192.168.1.2
Subnet mask 255.255.255.0
Default Gateway 192.168.1.1


DHCP Parameters:

IP address range 192.168.1.2 to 192.168.1.254
subnet mask 255.255.255.0
Gateway 192.168.1.1
DNS1 192.168.1.1
DNS2 None

Client (WS1) needs to be configured to obtain DHCP parameters automatically.

Network Diagram:

Network+ Lab Sim image

Note: Please refer to the SimulationExams.com Network+ Lab Simulator software to try complete lab with Instructions.

Previous   |   Next


Disclaimer: All Simulation Exams practice tests, study guides and/or material are neither sponsored by, nor endorsed by, nor affiliated with CompTIA® or any other company. All trademarks are trademarks of their respective owners and duly  acknowledged. A+™, Network+™, i-Net+™, Server+™,Security+™ are registered trade marks of CompTIA®. The practice tests material is a copyright of SimulationExams.com and the same is not approved or endorsed by respective certifying bodies. Thank-you for your interest in Simulation Exams. Please see read me file before you download, install, and/or use any software from SimulationExams.com For any information or questions regarding this Website, please e-mail webmaster at simulationexams.com