Frequent Questions      

 

Download Network+ Lab Simulator   |    Available Labs

Configuring WEP on client computers in wireless network environment

Previous   |   Next

 
  Description: Configuring WEP on client computers in wireless network environment.

Scenario: Configure a wireless WiFi connection on client computers WS3 and WS4 to connect to Access Point AP1 using WEP key Cert1 and SSID CertExams. Verify communication between the work station WS3 and DHCP server (192.168.1.2) using Ping command from WS3 or WS4. Note that AP1 is already configured with appropriate SSID and WEP code (5/13 char long) DHCP is also configured with IP address 192.168.1.2 and subnet mask 255.255.255.0

Network Diagram:

Note: Please refer to the SimulationExams.com Network+ Lab Simulator software to try complete lab with instructions.

Previous   |   Next

 

Copyright 2000-2017 SimulationExams.com All rights reserved

Website design by Anandsoft.com

Disclaimer: All Simulation Exams practice tests, study guides and/or material are neither sponsored by, nor endorsed by, nor affiliated with CompTIA or any other company. All trademarks are trademarks of their respective owners and duly  acknowledged. A+, Network+, i-Net+, Server+,Security+ are registered trade marks of CompTIA. The practice tests material is a copyright of SimulationExams.com and the same is not approved or endorsed by respective certifying bodies. Thank-you for your interest in Simulation Exams. Please see read me file before you download, install, and/or use any software from SimulationExams.com  For any information or questions regarding this Website, please e-mail webmaster at simulationexams.com