Frequent Questions      

   CCNA™ (200-125) VLAN/VTP Practice Questions

 

Home
       Previous           Next     

Q6: You have two switches with 24 ports each and configured the network to have only one VLAN. Do you need to implement the VTP between the switches?

A. YES

B. NO

  Correct Answer: B

 

Explanation:

The primary function of VTP is to tag frames (with VLAN ID) as they traverse through the switch fabric. The switch fabric is assumed to have multiple VLANs. If there is only one VLAN, there is no need to tag a frame. Therefore, there is no need to implement VTP between the switches that have only one VLAN.

Home
     Previous           Next     

Copyright © 2000-2017 SimulationExams.com All rights reserved

Website design by Anandsoft.com

Disclaimer: All Simulation Exams practice tests, study guides and/or material are neither sponsored by, nor endorsed by, nor affiliated with Cisco® Systems or any other company. All trademarks are trademarks of their respective owners and duly  acknowledged. CCNA™, CCENT™, ICND2™, CCNP™, CCIE™ are registered trade marks of Cisco® Systems. The practice tests material is a copyright of SimulationExams.com and the same is not approved or endorsed by respective certifying bodies. Thank-you for your interest in Simulation Exams. Please see read me file before you download, install, and/or use any software from SimulationExams.com  For any information or questions regarding this Website, please e-mail webmaster at simulationexams.com