Frequent Questions      

CCNP™ Route Practice Questions 

 

Exam Code 300-101

 

Home
   Previous             Next             

Q8. The OSPF path cost in Cisco routers is calculated using which parameters?

A. Bandwidth, Number of Hops

B. Bandwidth only

C. Ticks

D. Bandwidth, MTU, Reliability, Delay, and Load.

  Correct Answer: B

 

Explanation:

In general, the path cost in OSPF network is calculated using bandwidth only. The formula used is [108 / Bandwidth]. For example, the cost of a 56kbps serial link is 1785. The default cost of a 10mbps Ethernet is 10.

Home
 Previous             Next                           

Copyright © 2000-2017 SimulationExams.com All rights reserved

Website design by Anandsoft.com

Disclaimer: All Simulation Exams practice tests, study guides and/or material are neither sponsored by, nor endorsed by, nor affiliated with Cisco® Systems or any other company. All trademarks are trademarks of their respective owners and duly  acknowledged. CCNA™, CCENT™, ICND2™, CCNP™, CCIE™ are registered trade marks of Cisco® Systems. The practice tests material is a copyright of SimulationExams.com and the same is not approved or endorsed by respective certifying bodies. Thank-you for your interest in Simulation Exams. Please see read me file before you download, install, and/or use any software from SimulationExams.com  For any information or questions regarding this Website, please e-mail webmaster at simulationexams.com