Frequent Questions      

 

Download Network+ Lab Simulator   |    Available Labs

Troubleshooting DNS server configuration on a client computer using ipconfig/all command

Previous   |   Next

 
  Description: Troubleshooting DNS server configuration on a client computer using ipconfig/all command.

Scenario: WS1, which has been manually configured, is not able to ping R1 by using host name. However, ping to 192.168.1.1 by using IP address is successful. Verify that the problem exists and correct the same using appropriate diagnostic command in the command prompt. DNS server is located at IP address 192.168.1.2

Network Diagram:

Note: Please refer to the SimulationExams.com Network+ Lab Simulator software to try complete lab with Instructions.

Previous   |   Next

 

Copyright 2000-2017 SimulationExams.com All rights reserved

Website design by Anandsoft.com

Disclaimer: All Simulation Exams practice tests, study guides and/or material are neither sponsored by, nor endorsed by, nor affiliated with CompTIA or any other company. All trademarks are trademarks of their respective owners and duly  acknowledged. A+, Network+, i-Net+, Server+,Security+ are registered trade marks of CompTIA. The practice tests material is a copyright of SimulationExams.com and the same is not approved or endorsed by respective certifying bodies. Thank-you for your interest in Simulation Exams. Please see read me file before you download, install, and/or use any software from SimulationExams.com  For any information or questions regarding this Website, please e-mail webmaster at simulationexams.com